350-401 Passed, 350-401 Exam Simulator Free

Wiki Article

P.S. Free & New 350-401 dumps are available on Google Drive shared by PrepAwayPDF: https://drive.google.com/open?id=1YqxG1RJf3O6Oplp_5B9KRaAJbhHsKJxY

Modern technology has changed the way how we live and work. In current situation, enterprises and institutions require their candidates not only to have great education background, but also acquired professional 350-401 certification. Considering that, it is no doubt that an appropriate certification would help candidates achieve higher salaries and get promotion. However, when asked whether the 350-401 Latest Dumps are reliable, costumers may be confused. For us, we strongly recommend the 350-401 exam questions compiled by our company, here goes the reason. On one hand, our 350-401 test material owns the best quality.

Cisco 350-401 Exam is the core exam for the CCNP Enterprise certification, which is a professional-level certification that validates the skills required to design, implement, and manage enterprise networks. 350-401 exam covers a wide range of topics, including network architecture, virtualization, infrastructure, security, automation, and network assurance. It is a 120-minute test that consists of 90-110 questions and is available in English and Japanese.

>> 350-401 Passed <<

350-401 Exam Simulator Free & Dumps 350-401 Free

Now, our 350-401 learning prep can meet your demands. You will absorb the most useful knowledge with the assistance of our study materials. The 350-401 certificate is valuable in the job market. But you need professional guidance to pass the exam. For instance, our 350-401 exam questions fully accords with your requirements. Professional guidance is indispensable for a candidate. As a leader in the field, our 350-401 learning prep has owned more than ten years’ development experience. Thousands of candidates have become excellent talents after obtaining the 350-401 certificate. If you want to survive in the exam, our 350-401 actual test guide is the best selection. Firstly, our study materials can aid you study, review and improvement of all the knowledge.

Cisco Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Sample Questions (Q112-Q117):

NEW QUESTION # 112
Which feature must be configured to allow packet capture over Layer 3 infrastructure'?

Answer: B

Explanation:
Reference:
Encapsulated remote SPAN (ERSPAN): encapsulated Remote SPAN (ERSPAN), as the name says, brings generic routing encapsulation (GRE) for all captured traffic and allows it to be extended across Layer 3 domains.


NEW QUESTION # 113
What is the data policy in a Cisco SD-WAN deployment?

Answer: B

Explanation:
1 and 3 - Configuration4 and 5 - Orchestration


NEW QUESTION # 114
Refer to the exhibit.

Which configuration allows Customer2 hosts to access the FTP server of Customer1 that has the IP address of
192.168.1.200?

Answer: D

Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/ip/ip-routing/200158-Configure-Route-Leaking-between-Global-a.h
Static routes directly between VRFs are not supported so we cannot configure a direct static route between two VRFs.
The command "ip route vrf Customer1 172.16.1.0 255.255.255.0 172.16.1.1 global" means in VRF Customer1, in order to reach destination 172.16.1.0/24 then we uses the next hop IP address 172.16.1.1 in the global routing table. And the command "ip route 192.168.1.0 255.255.255.0 Vlan10" tells the router "to reach 192.168.1.0/24, send to Vlan 10".


NEW QUESTION # 115
Refer to the exhibit.

An engineer must modify the access control list EGRESS to allow all IP traffic from subnet 10.1.10.0/24 to
10.1.2.0/24. The access control list is applied in the outbound direction on router interface GigabitEthemet 0/1.
Which configuration commands can the engineer use to allow this traffic without disrupting existing traffic flows?
A)

B)

C)

D)

Answer: C


NEW QUESTION # 116
An engineer has deployed a single Cisco 5520 WLC with a management IP address of 172.16.50.5/24. The engineer must register 50 new Cisco AIR-CAP2802I-E-K9 access points to the WLC using DHCP option 43.
The access points are connected to a switch in VLAN 100 that uses the 172.16.100.0/24 subnet. The engineer has configured the DHCP scope on the switch as follows:

The access points are failing to join the wireless LAN controller. Which action resolves the issue?

Answer: B

Explanation:
Explanation
The Option 43 hexadecimal string is assembled as a sequence of the TLV values for the Option 43 suboption:
Type + Length + Value. Type is always the suboption code 0xf1. Length is the number of controller management IP addresses times 4 in hex. Value is the IP address of the controller listed sequentially in hex.
On this question, there is 1 controller with management interface IP addresses 172.16.50.5/24. The type is
0xf1. The length is 1 * 4 = 8 = 0x04. The mgmt IP addresses 172.16.50.5 translate to ac.10.32.05 (0xac103205). When the string is assembled, it yields f108c0a80a05c0a80a14. The Cisco IOS command that is added to the DHCP scope is:
option 43 hex f104ac103205


NEW QUESTION # 117
......

The Cisco modern job market is becoming more and more competitive and challenging and if you are not ready for it then you cannot pursue a rewarding career. Take a smart move right now and enroll in the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) (350-401) certification exam and strive hard to pass the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) (350-401) certification exam.

350-401 Exam Simulator Free: https://www.prepawaypdf.com/Cisco/350-401-practice-exam-dumps.html

2026 Latest PrepAwayPDF 350-401 PDF Dumps and 350-401 Exam Engine Free Share: https://drive.google.com/open?id=1YqxG1RJf3O6Oplp_5B9KRaAJbhHsKJxY

Report this wiki page